ESPA Vigila 100 Submersible Pump
Very compact submersible pump for drainage, removal of clean water and infiltration water; for emptying ponds, swimming pools and tanks.
It is supplied with 10 m of electric cable with a plug and level switch to automate its operation according to the water level. Made entirely from plastic materials, it allows very easy handling for all types of household applications involving clean water.
Its compact design allows multiple applications where other options are not possible.
Designed with a stainless-steel shaft and a double set of NBR seals and gaskets for optimum watertightness.
It allows the passage of solid particles of up to 5 mm, which improves its usefulness and allows smooth operation.
Its motor is cooled by the delivery water.
Performance Features
| Single-phase models | Intensity [A] | Input power P1 [kW] | Motor power P2 | Condenser capacity [µF] | |
|---|---|---|---|---|---|
| 50 Hz | 1~ 230V | 1~ | [kW] | [HP] | 1~ |
| 1,00 | 0,22 | 0,11 | 0,15 | 6µF-450V | |
| Single-phase models | Flow [m³/h] | 0,0 | 0,6 | 1,2 | 1,8 | 2,4 | 3,0 | 3,6 | 4,2 | 4,8 |
|---|---|---|---|---|---|---|---|---|---|---|
| Height [m] |
5,5 | 5,0 | 4,5 | 4,0 | 3,4 | 2,9 | 2,4 | 1,9 | 1,3 |
Series features Vigila 100
Equipment
- Check valve: No
- Draining plug: No
- Fittings: Glue
- Handle: Included
- Pre-filter: Included
- Support base: Included
Electrical characteristics
- Electrical isolation: F Class
- Motor speed operation: Constantly speed
- Motor type: Asynchronous
- Protection rating: IP68
- Reset: Automatic
- Service factor: S1
- Service type: Continuous
Manufacturing characteristics
- Discharge connection type: Hose Connector
- Discharge diameter: D25
- Motor cooling: Water
- Solid passage (mm): 5
- Stages: Single-Stage Centrifugal Pump
Materials
- Discharge body: Technopolymer
- Impeller/s: Technopolymer
- Mechanical seal bracket: Technopolymer
- Motor casing: Technopolymer
- Nuts and bolts: Stainless steel AISI 304
- Outer pump body: Technopolymer
- Pre-filter: Technopolymer
- Pump shaft: Stainless Steel AISI 420
- Suction body: Technopolymer
- Support base material: Technopolymer
Usage limits
- Liquid temperature (ºC): Min: 4 – Max: 35
- Maximum no. of motor start-ups (start-ups/minute): 0,50
- Maximum submersion (m): 4
- Maximum working pressure (bar): 1
Contact Us
