| Max Feed: 3.96 GPH (15 LPH) |
| Max Pressure: 100 PSI (6.9 bar) |
Overview
- Patented TFD (Tube Failure Detection) system protects against chemical spills from a worn out tube and activates an alarm output relay
- Self-Priming against maximum line pressure
- Cannot Vapor Lock or Lose Prime
- Four pump tube material options: Norprene®, Norprene® Chemical, Tygothane®, and FKM
- New and Improved Pump Head provides increased performance and strength.
Fixed vs. Variable Speed
-
Variable Speed Models (continuous pulse free output)
Continuous pumping, even while adjusting the percentage of output. See image below.
Graphical representation of the variable speed peristaltic pump injection characteristics.
Note: Your chemical or solution is mixed in the fluid. This image is only illustrating the feed characteristics.
Fixed Speed Models (intermittent cycle time output)
You control the pumps feed by using timers (built-in or external). See image below.
Usually fixed speed outputs can be adjusted by:
- Selecting the pump head tube size.
- Choosing the desired RPM (revolutions per minute).
Graphical representation of the fixed speed peristaltic pump injection characteristics.
Note: Your chemical or solution is mixed in the fluid. This image is only illustrating the feed characteristics.
Parts List
| LITERATURE | DOWNLOAD |
|---|---|
| Exploded View & Parts List (PDF) | |
| Upgraded pump head and tube assembly cutsheet (PDF) | |
| Conversion Chart A-100 to A-100N (PDF) |
Product Enquiry
